EndZone
Handler Endzone Play
davidwalker629This is a great endzone play when the disc is off center and the defense is forcing the right way. It can be used on either side of the field, just flipped.
Offense
Modified Sweep
davidwalker629This is a modified sweep play to get things flowing in a horizontal offense. Once the pull is centered, the handler will signal for the play. 1 will cut across the field as the other three go deep. Make sure that 3 cuts deep and towards the sideline to open up more of the field for 5 and 7. Once 1 gets the disc, a good fake to 5 or 7 has to happen. If the defense bites, the break throw to 3 should be open.
EndZone
Zipper
davidwalker629This play is an endzone play where 4 and 5 make cuts to the sideline which should open 6 up for a straight cut to the front of the stack.
EndZone
Isolation
davidwalker629This play is made such that player 4 should have a 1-1 chance to get open. Players 2 and 6 will cut to the back of the end zone and then cut across the field. Here player four only makes 2 cuts to get open. If needed, player 4 can continue cutting to get open. Player 3 is ready for the dump and then would try to swing it to player 1 or 7 if player 4 can't get the disc.
Offense
Sweep
davidwalker629This is a sweep play to get things flowing in a horizontal offense. Once the pull is centered, the handler will signal for the play. 1 will cut across the field as the other three go deep. Make sure that 3 cuts deep and towards the sideline to open up more of the field for 5 and 7. Once 1 gets the disc, a cut in from either 5 or 7 should get the disc and then look for 3 to be open in the endzone.
Offense
Diamond
davidwalker629This play is from the horizontal stack. The first cuts come from 3 and 5. At the same time that 3 and 5 make their initial cut, 7 can make a deep cut while 1 waits. Once 3 and 5 make the second cut, 3 should get the disc and be looking for 7 coming back under. At that time, 1 should be making a deep cut for the continuation play.
Drills
Horizontal Flow: Cutting & Throwing to Space
adrianliemThis is a variant on a basic Horizontal Flow drill. In this variation, the initial down-field flow cut (cutter #3) is a bluff cut setting up a bigger down-field gainer by #4. Note: All passes should be thrown into the open space, forcing the cutter to run onto the disc.
Drills
Jeff-drill visszafordulassal
loltimateUgyanaz, mint a sima Jeff-drill, csak visszafordula futo give-and-go -nal. Ezzel egyreszt gyakololjuk kicsit a kreativ cutolast, azaz, hogy nem mindig az elso iranyba valo futas lesz a jo, neha vissza kell fordulni, zartrol nyilt, vagy nyiltrol zart oldalra. Masreszt igy csak a palya egyik felet hasznaljuk, ezaltal ezt lehet ket kulon csoportban csinalni, ha sokan vagyunk.