Step by step 16 steps
  1. Step 1

    Play begins in the middle of the field.

  2. Step 2

    The off handler (2) set ups on the force side of the disc, The first look is immediately to the front of stack (3) handler breakside.

  3. Step 3

    If not there, 1 fakes the throw, 3 returns to the front of the stack as fast as possible.

  4. Step 4

    Cutters 7 & 6 at the back of the stack are cutting off of each other, hoping to get open under - to the sideline.

  5. Step 5

    If they do not get the disc, they are cutting when the handler fakes and busting back into the stack, while 4 & 5 push the stack down the field.

  6. Step 6

    Cuts continue in this fashion, exclusively coming from the back of the stack. If the stall gets to stall 4, the handler hits his dump (2).

  7. Step 7

    Handler 1 goes strike, if he gets the disc - we win. Cutter 5 is setting his cut up based on if 1 gets the disc. If he does, 5 goes deep.

  8. Step 8

    If handler 1 is not open, 2 will fake him, 1 finished cut by going 7 to set the stack. 3 fills from the front of the stack. While this is happening 5 recognizes the huck isn't there, and cuts under - cutters continue to cut per usual to each side.

  9. Step 9

    Handler 2 will swing to handler 3, handler 1 will continue his 7 cut to the far break side for the full swing. Cutter continues his cut to get out of the open space. Cutter 4 sees the swing pass go to Handler 1 on the breakside and begins his cut.

  10. Step 10

    Handler 3 hits handler 1 with the full swing. Cutter 4 cuts under for the continuation, while cutter 7 is setting up the next cut deep. Handler 2 runs to set up the stack, pushed back to remain 10-15 yards from the disc.

  11. Step 11

    If the continuation up the line is cut off, the disc is swung to handler 3 in the middle of the field. 1 goes strike for power position, 2 (front of stack) goes breakside, 4 busts back into the stack and cutting line pushes up and sets up cuts.

  12. Step 12

    If 1 is covered, he fills in as the dump on the force side, 2 fills in at the front of the stack, and we are back at square one. Cuts continue to be set up and made!

  13. Step 13

    From square one, continue to make cuts from the back of the stack and move as needed. Handlers looking dump at stall 4.

  14. Step 14

    Cuts continue, 4 is open!

  15. Step 15

    4 continues to motion to cutter 7 up the field, 6 continues the flow!

  16. Step 16

    And then we win.