Step 1

First handlerstarts with the disc in the center of the field.

Step 2

Second handler makes a dump cut horizontally across the field behind the first handler and receives the dump pass.

Step 3

Front of the stack makes a swing cut and receives the swing pass on the break side.

Step 4

Second handler moves to the center of the field and receives the disc. The swing cutter begins to clear upfield. The first handler sets up 45 degrees back on the break side of the field. The stack pushes up field.

Step 5

Swing cutter clears to the back of the stack. The second handler makes a dump cut horizontally across the field behind the first handler and receives the dump pass.

Step 6

Front of the stack makes a swing cut and receives the swing pass on the force side.

Step 7

Second handler moves to the center of the field and receives the disc. The swing cutter begins to clear upfield. The first handler sets up 45 degrees back on the force side of the field. The stack pushes up field.

Step 8

Swing cutter clears to the back of the stack. The second handler makes a dump cut horizontally across the field behind the first handler and receives the dump pass.

Step 9

Front of the stack makes a swing cut and receives the swing pass on the break side.

Step 10

Second handler moves to the center of the field and receives the disc. The swing cutter begins to clear upfield. The first handler sets up 45 degrees back on the force side of the field. The stack pushes up field, and the cycle continues.