Set up in an horizontal stack with the handlers in power position (break side handler up a few yard and active side handle back at a 45 degree angle)
1 &2 cutters cut deep hard. 3 cutter gives a hard in cut. If open he may be hit but this isn't primary. 4 cutter cuts horizontally a split second after 3 cutter to ensure a pick doesn't occur. The 3 cutter quickly stops the active side cut and goes break.
The 1 cutter continues his hard deep cut while 2 cutter stops his and gives a hard cut to the active side. 3 & 4 continue their break cuts ready to push upfield. 2 cutter gets the disc.
1 cutter reads whether he has the deep or the under. If he cuts under the 4 cutter goes deep and the 3 cutter pushes hard upfield. The handlers follow the disc in power position formation.
This wheel pattern continues with deep cuts coming from the break side and that person either getting the deep throw or stopping and coming underneath. A handler can cycle into this pattern but this must be communicated. Here 5 handler pushes upfield and 2 cutter stays back.
As you near the end zone, transition into a vertical stack with the handlers remaining in power position.