Step 1

Three handlers set up , with roughly 15 yards of space before stack.

Step 2

At stall 4 the handler with disc (3) activates, turns, faces and makes eye contact with the central handler (2).

Step 3

Both central and far side handler advance toward disc based on eye contact. Central handler (2) fakes back and goes upfield, far side handler (1) fakes upfield and goes back for the dump.

Step 4

If disc is dumped to 1, 2 swirls for the reset

Step 5

Disc should NEVER stay in the middle, we want to swing and to change the point of attack

Step 6

On the far side the rotation is exactly the same, now the central handler (1) fakes back and goes upfield, the far side handler (3) fakes upfield and goes back

Step 7

The disc can be put up field to the strike cutter here.

Step 8

At this point,since the 3 cutter is now already in position for the immediate dump the 2 should clear to the far side

Step 9

If the disc is ever stuck in the center handler position both cutters activate once called or eye contact is made

Step 10

The cutter from behind the mark should go upline (1), the cutter on the open side should cut backfield (2)

Step 11

The objective of the central handler here is to reset the stall count out in space to reset the handler positioning