The Pull
Set up into a standard horizontal stack - three handlers/four cutters
The power cutters (2 & 3) initiate the movement. Since its a force flick, 3 cuts in on the open side and 2 cuts out from the breakside. Meanwhile 1 should move closer to the center of the field to set up a continuation cut. Cutter 4 needs to move down the field and reset the stack.
Once 3 has the disc, cutter 2 has two options either continue the deep cut or cut in. 2 needs to clear if he/she does not get the disc - creating space for 1 to make a continuation cut which can be either an deep cut or an in-cut.
In this situation 3 has three options: 1) Cutter 2 (going deep or coming in), 2) Cutter 1 once Cutter 2 clears the center of the field, and 3) turn around and dump the disc back to the handler.
Cutter 3 clears back to the stack. Cutter 1 completes the cut and clears if he/she doesn't get the disc. Cutter 4 (or the next cutter) needs to setting up their cut while Cutter 1 is making their cut.
Cutter 4 made an in-cut and received the disc - Cutter 2 is already setting up the next continuation cut.
Let's say Cutter 4 can also handle - then one of the side handlers pushes up and joins the cutters and resets the stack - in this case Handler 7 becomes Cutter 7 and resets the stack with Cutter 1. Cutter 2 and 3 are both setting up their next cuts as the stack gets reset.
Cutter 3 cuts in while Cutter 2 completes the deep cut.
Handler 4 looks off both options and activates the dump - Handler 5 cuts upline. If s/he is not open Handler 4 turns around to Handler 6 cutting across behind the disc to the break side. Even if the handlers are moving the disc among themselves, downfield cutting should continue - Cutter 7 is setting up the next in-cut while as Handler 4 dumps the disc off to Handler 5.
Because Cutter 7 setup the cut as the disc was reset s/he was able to make a clean cut as soon as Handler 5 got the disc which allowed Handler 5 to throw the disc upfield. Once we are close enough to the endzone. Handlers will make the call to go into a vertical stack.
At this point we have to go into a vertical stack in the endzone with three handlers.
CUTS FROM THE BACK OF THE STACK!! Unless a play is called.