Step 1

When the thrower is in center field, he should have two reset options. The first is 45 degrees behind on the open side and the other should be inline on the break side

Step 2

To initiate a dump cut, the thrower should turn to face the handler they want to engage. In this case, #1 looks at #2 first.

Step 3

#2 makes a jam cut and cuts horizontally behind the thrower to ward the break side.

Step 4

Then they cut back to the open side if the first look is covered.

Step 5

If the first reset handler is unable to get the disc, the thrower should then engage the other handler.

Step 6

The cutter from the break side should then cut up line at a 45 degree angle

Step 7

Then as a second option cut back on the same line to receive the around throw. Then the handlers should set up the reset sequence again.

Step 8