Step 1

Setup with 2 handlers and 5 in the stack. If the disc is towards the middle of the field, set the stack slightly on the open side.

Step 2

Primary cutters are the back and second back of stack. Start setting up the cut early.

Step 3

As 5 comes under to receive the disc, 4 should be starting to setup their cut.

Step 4

And ready to receive the disc as 5 turns to look for the next pass.

Step 5

A deep cut could also be generated in a similar way.

Step 6

Setup the cut early.

Step 7

4 is setting up their deep cut as the disc is on its way to 5, being sure to keep away from the sideline until the disc is thrown.

Step 8

So they have a good view of it all the way to the end zone.

Step 9

Stacking on the open side should mean the front of stack is available for an easy inside break pass.

Step 10

If this is thrown, one of the secondaries should look for the continuation on the break side.

Step 11

Which will usually be a most uncontested throw and catch for a big gain.

Step 12