Step 1

pull goes up

Step 2

Play will run the exact same on both sides, so force doesn't matter, with one small exception.

Step 3

disc is centered

Step 4

immediately (even before count is on) both reset handlers strike down the middle of the field

Step 5

Immediately following them, the shallow cutter on both sides cut to the middle of the field and strike deep.

Step 6

Enter step description...

Step 7

The remaining cutter on each side now comes under for the disc,

Step 8

and looks to continue for what has now become the "back of the stack"

Step 9

Enter step description...

Step 10

Going back to the first look, (after the handlers and first pair of cutters have cleared).

Step 11

If the unders are unavailable...

Step 12

these cutters still clear, but here's where the one side acts differently than the other - whichever of these two cutters recognizes they are on the break side, should go to the middle of the field, and then immediately pop back to the breakside space for a swing/reset.

Step 13

Then the break side continues comes from the back of the stack.

Step 14

Enter step description...

Step 15

Enter step description...

Step 16

Or on the open side, before hitting the reset, the back of the stack comes under for a big gainer.

Step 17

Enter step description...