Step 1

This shows the stack from brick. I have not included any defence at this point:. RED LINE INDICATES DIRECTION OF FORCE.

Step 2

Back of stack cuts to the open-side while front of stack cuts to the break.

Step 3

Handler throws open side, at which point the front of stack has abandoned their cut and are running long. C4 should now see C1 cutting deep and C3 turning for the under.

Step 4

C4 does not have an open cutter (long or under) and so turns to face their handler dump

Step 5

They throw the dump pass. Meanwhile C3 has cut back into the stack and C1 are coming back to the stack

Step 6

C4 re-joins the stack as H1 attempts a break to re-centre the disc.

Step 7

If H2 cannot get free immediately, they cut down the line. While H3 comes up for the around break

Step 8

H1 then re-tries to swing to the middle

Step 9

If successful, the disc is now in the centre and the cutters start again as above.

Step 10

Step 11

Enter step description...

Step 12

Step 13

Step 14

Step 15

Step 16

Step 17

Step 18

Step 19

Step 20

Step 21

Step 22

Step 23