Step 1

Setup with Force. Note Reset Handlers is on open side and behind disc holder at 45 degrees angle. Reset handler is activated at stall 4 latest. A. Stack is close (7m or so) and B. Those in the stack are packed tight with a bit more space allowed for 6 and 7.

Step 2

Roles of the players: Front 1 sets the stack with Front 2. Floater is either helping back or front depending on where flow takes them and they are needed. Back1st looks to continue off the Front cuts and Back2nd looks to continue of Back1st or the front cuts.

Step 3

Front initiates cutting and uses the lateral space lanes on both sides of the stack. Cut laterally either to the break or open side.

Step 4

Open Side FI

Step 5

Reset Disc for next stage

Step 6

After a second the Front2 can cut break side. Front of stacks not receiving the disc should look to bust deep for continuation cuts and to clear out the lane.

Step 7

Reset Disc for next stage. Back of stack

Step 8

Back of stack looks to continue off the front of stack cut

Step 9

If no huck option look to come back in for the disc. For a nice yard gain. Back2nd should be looking to continue off back 1. Hopefully a score.

Step 10

Reset. What if back of stack doesn't get the disc

Step 11

If Back of Stack does not get the disc they need to clear out using a deep bail out line to avoid taking the lateral space that is dedicated to the front of stack cutters.

Step 12

This is called the bail out line and ideally this is where the new back of stack position starts.

Step 13

Once you are back in the stack you can determine if you are needed at the front or back of stack regardless of what your starting position was.

Step 14

Score!