This is the beginning of Anchor that has the opposite action of parachute
As soon as the force is recognized, the 3 cutters on the force side begin to cut shallow and to the breakside to clear space out deep. The farthest cutter on the force side(7) is making sure to make his cut such that the handler can throw a soft break to him if it's open. The other two cutters are just getting out as soon as possible, shallow and to the breakside. The cutter on the far breakside(4) starts to run a little deep and towards the center of the field in order to set up his next cut.
As everyone clears out the anchor becomes iso'd in the center of the field. Because we have now cleared out the entire force side under and because his guy was likely poaching a little deep off him to start the cut, we will primarily look for that under.
As this happens anchor is technically over, and we are now in the ho-stack flow. Which is really more like a side-stack.
The back of that stack should be setting up their cut to the center of the field as the anchor catches the disc
In this scenario I had the next guy go deep because going deep is chill as hell