Step 1

Set up.

Step 2

Disc is in the middle of the field and it is stopped disc. In this scenario 4 and 5 would be the live cutters.

Step 3

Both cuts were defended well. Clear deep looking for open space. When the thrower looks at the dump they initiate their cut.

Step 4

If the dump gets the disc on the break side it is the 3's cut .

Step 5

3's cut is all about timing their cut off the dump/bernie

Step 6

Let's rewind to step 3 and see what happens if the dump gets it on the open side. Once again the back two cutters need to be clear deep.

Step 7

So with the reset on the open side it is 2's turn to cut. This is a hard cut to time, you need to be out into space when the dump gets the disc so you can take advantage of the fact that their won't be a mark for a moment.

Step 8

Goal

Step 9