Step 1

2 and 3 are handlers and dumps.

Step 2

When dump is activated, the A dump will start by hitting the PIVOT point and either going UPLINE or AROUND. If A is looked off, B will then make moves to the PIVOT point

Step 3

The PIVOT point depends entirely on where the disc is in relation to the stack. The disc is currently on the OPEN sideline. Pivot is 45 degrees toward the break sideline

Step 4

Disc is now centered in the field. Pivot point has changed.

Step 5

If the disc is on the break sideline, PIVOT point is pretty much at the front of the stack. You can either cut horizontally break side or directly down

Step 6

In this case, 2 decides to cut directly down.

Step 7

Step 8

If the down cut is covered, 2 will leak to the break side behind the thrower. Thrower now has either this dishy throw OR to start looking for B handler (blue 3)

Step 9

Enter step description...

Step 10

In this case, B handler (blue 3) decides to make the horizontal break side cut

Step 11

Continuation from 7. Handlers will sprint to front of stack and push the stack down the field.

Step 12

Enter step description...

Step 13

Enter step description...

Step 14

Enter step description...