Standard set up for a horizontal stack with the defense forcing flick. As the disc is with the central handler (2), the central cutters (5 and 6) are "hot". The open side cutter (6) will be cutting under, the break side cutter (5) will be cutting deep.
Cutters 5 and 6 set up their cuts by faking the opposite directions.
And then pivot hard and make their cuts.
If the disc is not thrown, the cutters need to clear hard as well. The under cut (6) will clear into 5's open spot in the stack, while the deep cut (5) will pivot and cut under into the open-side space. NOTE: Things should end up like they started with everyone back in the stack.
If the disc is swung to the open side (from 2 to 3) cutters 5 and 7 are now hot. and will initiate their cuts like in step 2. The key here is for 5 and 7 to initiate their cuts while the disc is being swung (in the air).
And then cut under and clear out hard like in steps 3.
And clear hard back into the stack.
If the disc swings to the break side (from 3 to 2 to 1) cutters 4 and 6 become hot. There is a slight wrinkle here, the first look for handler #1 is to continue to the break side. So cutter 6 will start to move up field while cutter 4 cuts in for the continue
If cutter 4 is open, cutter 6 continues up line for another continue.
And LOTS of yards
If instead the defense stops the break, we return to the usual motion.
Cutter 6 cuts under hard, and cutter 4 does deep.
And then clear back into the stack