Initial offence set up with only a mark(assume force flick)
cutters begin their rotation at stall 1.
Enter step description...
Enter step description...
Enter step description...
Stall 4 comes around. Handler #2 stops looking upfield at their cutters and looks to the break side handler (#1) to initiate handler movement.
When handler 1 makes eye contact with handler 2 this signals them to set up and complete their strike cut. this is the first look for a "reset" because it gains yards and puts this handler in the "power position".
strike set up: fake your defender for a break throw cut. this cut is still viable and advantageous if the thrower can get it off because then this would give the handler the entire force side of the field to work with.
The thrower fakes handler 2 for 1 of two reasons: 1) handler 1 is not open, they have tight defense on them, or 2) there is a good mark on the thrower and they cannot make that break throw. ' Either way the fake signals this handler 2 to continue strike.
If this handler is open great! Handler 2 would throw it and then clear break.
then we reset the handler positioning until stall 4-5 again.
Okay fastfoward to stall 5 on handler 1. Handler motion begins again. but lets say this strike throw cannot be completed.
as handler 2 is making their strike cut, this means that handler 3 should start a dump cut.
they will make a dump cut(called a bear cut) all the way around to the break side. As the handler with the disc you should wait until they are all the way break and not directly behind you. you'll be in the way of the up field looks.
Enter step description...
Enter step description...
reset to power positions( the angling of the 3 handlers.