Step 1

Set up: blue 2 and 3 are cones Red 1 with disc Blue 2 is front cone - this is cutter position A Blue 3 is back cone - this is cutter position B

Step 2

Red 2 fakes deep cut

Step 3

Red 2 comes under at an angle to receive a disc from red 1 Red 5 makes a fake under to turn and go deep as red 2 looks upfield

Step 4

Red 5 goes deep (straight) and red 2 throws to them

Step 5

Next cycle - red 3 and 4 move up, red 1 joins position A queue | red 6 and 7 move up and red 2 joins position B queue | red 5 moves to the handler line with a disc

Step 6

Repeat: red 3 fakes deep

Step 7

red 3 comes under at an angle to receive a disc from red 5. Red 6 makes a fake under to turn and go deep as red 3 looks upfield

Step 8

Red 6 goes deep (straight) and red 3 throws to them

Step 9

Reset - this time we'll go through an example where the cutter from position A doesn't feel they can throw deep so will call their cutter back under

Step 10

Red 4 fakes deep

Step 11

Red 4 comes under (angled) to receive a disc from red 6 |red 7 fakes under

Step 12

Red 7 goes deep (straight) but red 4 can't huck so shouts "UNDER!" to red 7.

Step 13

Red 7 turns and comes uner (angled) to receive a disc from red 4 | we've now moved the disc a considerable distance upfield

Step 14

Reset - this time we'll go through a similar one to last time but where position B cutter (red2 decides to fake deep and receive an under because they know that red 1 can't huck consistently)

Step 15

Red 1 fakes deep

Step 16

Red 1 comes under (angled) to receive a disc from red 7 | red 2 fakes deep

Step 17

Red 2 turns hard and cuts under (angled) to receive a disc from red 1.