Step 1

throwers start near the opposite corners, the 2nd person in line put on a mark forcing towards the sideline, another person setup as the primary handler in the middle of the field, and then one more person as the primary cutter downfield.

Step 2

the handler, makes a quick fake and then heads up line

Step 3

the thrower hits the upline cut, while the down field defender is trying to setup their position for a deep cut

Step 4

the cutter busts deep, timing the cut so the thrower can hit them right away

Step 5

throw the deep shot without waiting, if the cutter is too shallow, just throw it shorter, if the cutter is too deep already, pump fake and they have to come back under

Step 6

if the cutter is already too deep for the thrower, pump fake and the cutter needs to come back

Step 7

hit the under

Step 8

cutter should take their disc to the other throwing line, the reset/hucker goes to the cutting line, the thrower goes to the reset/hucker line and the mark becomes the thower

Step 9

keep rotating

Step 10

Enter step description...

Step 11

Enter step description...

Step 12

Enter step description...

Step 13

Enter step description...