Step 1

Set-up the stack 10 m from the handlers

Step 2

The cutter in the back of the stack fakes long and cuts in hard for the disc while the cutter in the front of the stack cuts to the break-side and goes deep.

Step 3

If the first cutter catches the disc, cutter #6 cuts for a continuation pass.

Step 4

4 keeps cutting long and is available for a second continuation

Step 5

The handlers move up the field to provide help if the cutters need to pass back.

Step 6

If the first cutter was NOT open...

Step 7

They clear to the break side immediately when the handler says clear or when they are 5m from the handlers. They should NEVER get within 5 meters of the handlers. The person who went break-side first keeps going long, the third person in the stack makes a second hard cut out and then in.

Step 8

The flow continues with 6 cutting in, 7 going long, and 4 attempting to get a continuation pass or cutting in. Number 5 waits for an emergency pass.

Step 9

Let's say that 6 gets passed to when they clear to the break side...

Step 10

5 can be the continuation for the break side in this case.

Step 11

At this point we can go into flow if we have good options. Otherwise, handlers catch up if 5 needs a dump pass, cutters reset the stack while the handlers are getting the disc, and do it all over again.